Mitsubishi QJ71LP21 Reference Manual page 26

2 SYSTEM CONFIGURATION
2.1.2 Setting items
2
2 - 2
(1) Table 2.1 shows the setting items on the master module of the remote master
station (MR) and the parameter setting items on GX Developer.
Table 2.1 Remote master station setting items
Setting items
Network module switch
STATION NO.
MODE
Parameter setting on GX Developer
MELSECNET/H Ethernet module count setting
Network type
Starting I/O No.
Network No.
Total stations
Group No.
Mode
Common parameters
Auxiliary setting
Station specific parameters
Refresh parameters
Valid module during other station access
Interlink transmission parameters
Routing parameters
: Always set,
1: Refer to the "Q Corresponding MELSECNET/H Network System Reference
Manual (PLC to PLC Network) (SH-080049)".
Remote master station (M
0
MELSECNET/H
(Remote master station)
: Default setting, : Set as needed,
MELSEC-Q
) Reference
R
Section 4.2.1
Section 4.2.2
Section 5.1.1
Section 5.1.2
Section 5.1.2
Section 5.1.2
—
Section 5.1.2
Section 5.1.3
Section 5.1.4
—
Section 5.1.5
Section 5.1.6
—
1
: No need to set
2 - 2