Loop Detection Clutch (Cl8 - Konica Minolta BIZHUB C3100P Service Manual

[1]
[2]
[1]
[2]
[3]
[2]
[1]
19. To reinstall, reverse the order of removal.

5.26 Loop detection clutch (CL8)

1. Remove the fuser unit.
F.5.3.1 Replacing the fuser unit
2. Remove the exit cover.
G.5.4 Exit cover
3. Remove the waste toner bottle.
F.5.2.1 Replacing the waste toner bottle
4. Remove the left cover.
G.5.2 Left cover
5. Remove the rear cover.
G.5.1 Rear cover
6. Remove the operation panel.
G.5.6 Operation panel
7. Remove the upper cover1/ upper cover2.
G.5.7 Upper cover1/ Upper cover2
8. Remove the printer control board.
[3]
[3]
[1]
G DISASSEMBLING/REASSEMBLING > 5. Disassembly/reassembly
14. Remove two screws [1].
15. While releasing the lock with the inserted metal ruler [2] or another
similar tool as shown in the illustration, remove the toner box drive
Assy [3].
NOTE
• When installing the toner box drive assy, be sure to hook
the claw [3] of the drive coupling section in the hole [2] of
the shaft [1].
16. Remove the harness from guide, and disconnect the connector [1].
17. Remove the screws [2], and remove the cover [3].
18. Remove the toner supply clutch [1].
G-25
procedure (b...