5.31 IDC sensor (IDCS)
1. Remove the toner cartridge (C,M,Y,K).
F.5.1.1 Replacing the toner cartridge (C, M, Y, K)
2. Remove the waste toner bottle.
F.5.2.1 Replacing the waste toner bottle
3. Remove the imaging unit (C,M,Y,K).
F.5.1.2 Replacing the imaging unit (C, M, Y, K)
4. Remove the transfer belt unit.
F.5.2.3 Replacing the transfer belt unit
[1]
[2]
[1]
[1]
[2]
[2]
[1]
[1]
G DISASSEMBLING/REASSEMBLING > 5. Disassembly/reassembly
5. Hold the both handles [1] and raise the guide [2].
6. Raise the guide [1] further and remove it.
NOTE
• Do not jerk off the sensor holder, to which a harness is
connected.
7. Remove two screws [1], and remove the sensor cover [2].
8. While slightly raising the ground plate [1], remove the IDC sensor
[2].
G-33
procedure (b...