Transport Motor (M2; Color Pc Drum Motor (M4 - Konica Minolta BIZHUB C3100P Service Manual

5. Remove the printer control board.
G.5.11 Printer control board (PRCB)
6. Remove the high voltage unit.
G.5.13 High voltage unit (HV1)
[3]
[1]
9. To reinstall, reverse the order of removal.

5.19 Transport motor (M2)

1. Remove the waste toner bottle.
F.5.2.1 Replacing the waste toner bottle
2. Remove the left cover.
G.5.2 Left cover
3. Remove the rear cover.
G.5.1 Rear cover
4. Remove the rear right cover.
G.5.3 Rear right cover
5. Remove the printer control board.
G.5.11 Printer control board (PRCB)
6. Remove the high voltage unit.
G.5.13 High voltage unit (HV1)
[2]
[3]
9. To reinstall, reverse the order of removal.

5.20 Color PC drum motor (M4)

1. Remove the waste toner bottle.
F.5.2.1 Replacing the waste toner bottle
2. Remove the left cover.
G.5.2 Left cover
3. Remove the rear cover.
G.5.1 Rear cover
4. Remove the rear right cover.
G.5.3 Rear right cover
5. Remove the printer control board.
G.5.11 Printer control board (PRCB)
6. Remove the high voltage unit.
G.5.13 High voltage unit (HV1)
[3] [1]
[2]
[2]
[1]
G DISASSEMBLING/REASSEMBLING > 5. Disassembly/reassembly
7. Remove four screws [1].
8. Disconnect the connector [2], and remove the developing motor [3].
NOTE
• When installing the motor, try to insert it straight, and take
care not to damage the gears.
7. Remove four screws [1].
8. Disconnect the connector [2], and remove the transport motor [3].
NOTE
• When installing the motor, try to insert it straight, and take
care not to damage the gears.
7. Remove three screws [1].
8. Disconnect the connector [2], and remove the color PC drum motor
[3].
NOTE
• When installing the motor, try to insert it straight, and take
care not to damage the gears.
G-20
procedure (b...