Field Service Ver. 1.0 May 2010
7.4.29
Loop detection clutch (CL8)
1. Remove the fuser unit.
See P.20
2. Remove the high voltage unit.
See P.66
3. Remove the ADF.
See P.47
4. Remove the scanner unit.
See P.52
5. Remove the rear right cover.
See P.45
6. Remove the cooling fan motor.
See P.72
[1]
[2]
[3]
[2]
7. Remove seven screws [1], and
[1]
A121F2C048DA
8. Remove the screw [1], and remove
9. Disconnect three connectors [3].
[3]
[1]
A121F2C029DA
7. OTHER MAINTENANCE ITEM
remove the upper cover [2].
the exit drive assy [2].
79