Konica Minolta BIZHUB C3100P Service Manual page 111

[1]
[1] [2]
[2] [1]
[2] [1]
[3] [1]
[2] [1]
[1]
[1]
G DISASSEMBLING/REASSEMBLING > 6. Disassembly/reassembly
6. Remove three screws [1], and remove the protect metal plate [2].
7. Remove the harness clamp [1], and remove the harness from the
wire saddle [2].
8. Remove the harness from two edge covers [1] and the wire saddle
[2].
9. Remove the E-ring [3].
10. Remove five screws [1], and remove the gear fixing metal plate [2].
11. Disconnect the connector [1].
G-38
procedure (P...