Entering The Preferred Dns Server Address - Hughes HN7000S User Manual

6. In the General tab, select
. Enter an appropriate IP address from the range of
address
available IP addresses and the appropriate Subnet Mask for
your network in the fields provided. Enter the IP address of
the terminal for the Default Gateway. Enter
the Preferred DNS server field. See Figure 37.
Figure 37: Entering the preferred DNS server address
7. Select OK to close the open dialog boxes and finish the
configuration.
8. Restart the computer even if Windows does not prompt you
to do so. This ensures the network settings are automatically
reset.
Appendix B • Typical operating system settings
Use the following IP
66.82.4.8
1037073-0001 Revision A
in
59