Ringer Equivalence Number (Ren) - Hughes HN7000S User Manual

Ringer equivalence number
terminated with a plug type 605 or a FCC plug type 6 position for
Australia.
CAUTION
To reduce the risk of fire, use only No. 26 AWG or larger UL
Listed or CSA Certified Telecommunication Line Cord.
This section applies to the HN7700S remote terminal only.
(REN)
The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on the telephone
line may result in the devices not ringing in response to an
incoming call. In most, but not all areas, the sum of RENs should
not exceed five (5.0). To be certain of the number of devices that
may be connected to the line, as determined by the total RENs,
contact the local Telephone Company. For products approved
after July 23, 2001, the REN for this product is part of the product
identifier that has the format US:5L4DT##B1032021.
The digits represented by the ## are the REN without the decimal
point (e.g., 00 is a REN of 0.0). For earlier products, the REN is
separately shown on the label.
If the Two-Way Hughes System causes harm to the telephone
network, the Telephone Company will notify you in advance that
temporary discontinuance of service may be required. But if
advance notice isn't practical, the Telephone Company will notify
the customer as soon as possible. Also, you will be advised of
your right to file a complaint with the FCC if you believe it is
necessary.
If you have been told to discontinue phone service and you
believe it is due to the HN7000S or HN7700S terminal, please
contact Hughes Customer Support. If you purchased your
HN7000S or HN7700S from one of our value added resellers
(VARs), please do not contact Hughes. Contact your VAR
according to the procedure supplied by them for technical
support. They are trained to help you with your technical
problem. If you are a user outside the United States, please
contact your service provider.
The Telephone Company may make changes in its facilities,
equipment, operations, or procedures that could affect the
operation of the equipment. If this happens, the Telephone
Appendix D • Conformance with standards and directives
1037073-0001 Revision A
79