Table of Contents
Advertisement
Transmission Removal
1. Remove seat, rear rack, rear cab, air box, and exhaust
system (if required for access).
2. Drain transmission lubricant.
3. Remove shift linkage rod ends from transmission
bellcranks.
4. Remove auxiliary brake mounting bracket and master
cylinder reservoir.
5. Remove PVT outer cover, both drive and driven clutch,
and inner PVT cover (refer to Clutch Chapter 6).
6. Remove rear PVT bracket.
7. Remove pin from front prop shaft at front housing, and
remove prop shaft.
8. Drive roll pin from rear driveshaft yoke.
9. Disconnect gear position indicator switch(es).
10. Remove left side transmission bracket, rear bracket,
and lower right bracket bolt.
11. Remove through-bolt from bottom of transmission.
12. Remove front transmission-to-engine mount bolts.
13. Position rear U-joint so front of transmission can be
lifted up.
14. Remove recoil for added removal clearance.
15. Remove transmission from right side of frame.
Front
Polaris Sales Inc.
Type Vl, Shaft Ride Transmission
8.53
TRANSMISSION
4/99
Advertisement
Table of Contents
Troubleshooting
