Typical Steering Assembly, Exploded View, ’99 Trail Boss 250 - Polaris Trail Blazer Service Manual

BODY / STEERING / SUSPENSION
Typical Steering Assembly, Exploded View, '99 Trail Boss 250
30 ft. lbs.
41 Nm)
Always use new
patch lock bolts
upon reassembly
99/00 ATV Update
23-24 ft. lbs.
(32-33 Nm)
12/99
NOTE: On 1999 Trail Boss 250 models:
To avoid damage to tie rods and other
steering components, be sure to install
stud ends correctly. Both sides must be
installed as shown, with inner rod end stud
pointing DOWN on the steering post, and
the outer rod end pointing UP, through the
strut casting.
25 ft. lbs.
(35 Nm)
Always use new
cotter pins upon
reassembly.
5.10
Loctite™ 242
8 ft. lbs. (11 Nm)
Polaris Sales Inc.