Table of Contents
Advertisement
TRANSMISSION
Type IV, Shaft Drive Transmission
Transmission Installation, Cont.
4. Install lower right and left transmission mounting
bolts, front transmission bracket, and rear
stabilizer support bracket. Tighten transmission
bolts securely in the following sequence.
Front support bracket upper and lower.
S
Stabilizer bracket upper and lower.
S
Bottom transmission bolts.
S
Lower left and right transmission mounting bolts.
S
5. Apply Loctite™ 272 to right hand drive shaft bolt and
install internally threaded spacer onto bolt. Torque
to specification.
Rear Drive Shaft Retaining Bolt Torque
35 ft. lbs. (4.85 kg-m)
Apply Loctite™ 272
6. Apply anti-seize to splines of drive shaft and install
right side drive shaft in transmission with opening
in U-joint upward. Support right hand hub and
install right hand upper control arm attaching bolts.
Install stabilizer bar arm on stabilizer bar.
4/99
8.20
Polaris Sales Inc.
Advertisement
Table of Contents
Troubleshooting
