TRANSMISSION REMOVAL
CAUTION
Serious injury may result if machine tips or falls. Be
sure machine is secure before beginning this
procedure. Always wear eye protection.
1. Remove the following components:
• Seat, see page 10.15.
• Engine compartment panel, see page 10.20.
• Rear ROPS tube, see "ROPS Assembly" page
10.5.
2. Disconnect the (-) negative battery cable from the
battery.
3. Remove the rear bumper and cargo box as an
assembly.
q
4. Loosen the clamps
retaining the intake ducts to the
air box.
w
5. Remove the two bolts
frame support.
9929422 R02 - 2017-2019 ACE 900 Service Manual
© Copyright Polaris Industries Inc.
retaining the air box to the
6. Remove the exhaust springs
r
to the exhaust pipe.
7. Remove or disconnect the following components from
the cargo box brace.
t
Ignition Coil Fastener
y
Harness Retainers
TRANSMISSION
e
retaining the silencer
6
u
Transmission Vent
Line
i
Heat Shield Push
Rivets
6.9