Lubrication - Shaft Drive Models - Polaris Trail Blazer Service Manual

MAINTENANCE

Lubrication - Shaft Drive Models

NOTE: On Shaft Drive models, lubricate these areas in addition to applicable general lubrication items.
1. Front Gear Case Fill Plug
Type l
4. Front Prop Shaft
U-Joint
Ill. Item
#
1 Front Gearcase Oil
2 U-Joint - Rear Prop Shaft, Front
(Shaft Ride Models)
3 Yoke - Rear Prop Shaft
(Shaft Ride Models)
4 U-Joints - Front Prop Shaft
5 Propshaft Yoke
6 Transmission
* More often under severe use, such as wet or dusty conditions
Semi-annually or 50 hours of operation (refer to Maintenance Schedule for additional information)
¡
Annually or 100 hours of operation (refer to Maintenance Schedule for additional information)
©
Grease conforming to NLGI No. 2, such as Polaris Premium All Season Grease, Conoco Superlube M or
¢
Mobilegrease Special
4/99
Type lll
Type ll
5. Propshaft Yoke
(3 pumps max.)
Lube Rec.
GL5 80-90 Weight
Gear Lube
Premium U-Joint
Grease
Premium U-Joint
Grease
Premium U-Joint
Grease
Premium U-Joint
Grease
Synthetic
Transmission
Lubricant
2. Rear Prop Shaft, Front U Joint
(Shaft Ride Models)
3. Rear Prop Shaft Yoke
(Shaft Ride Models)
Full
Method
Add to bottom of fill plug
threads. See page NO TAG
Locate Fittings and Grease
Locate Fittings and Grease
Locate Fittings and Grease
Locate fittings and grease - 3
pumps maximum
Add to proper level on dipstick.
Approx. 20 oz.. at change;
Approx. 32 oz.. initial fill after
disassembly.
2.
6.Transmission
Operating
Range
Frequency*
Change annually©
Semi-annually¡
Semi-annually¡
Semi-annually¡
Annually©
Inspect Monthly;
Change annually ©
Polaris Sales Inc.