Tire Pressure; Tire Inspection; Tire Tread Depth; Frame, Nuts, Bolts, Fasteners - Polaris Trail Blazer Service Manual

Tire Pressure

1999 Model
All Models Except Listed Below
Sportsman Models
(Independent Rear Suspension)
6x6

Tire Inspection

CAUTION:
S Maintain proper tire pressure. Refer to the warning tire
pressure decal applied to the vehicle.
S Improper tire inflation may affect ATV maneuverability.
S When replacing a tire always use original equipment
size and type.
S The use of non-standard size or type tires may affect
ATV handling.

Tire Tread Depth

Always replace tires when tread depth is worn to 1/8" (3
mm) or less.
Operating an ATV with worn tires will increase the possibility of
the vehicle skidding easily with possible loss of control.
Worn tires can cause an accident.
Always replace tires when the tread depth measures 1/8" (.3 cm)
or less.

Frame, Nuts, Bolts, Fasteners

Periodically inspect the tightness of all fasteners in accor-
dance with the maintenance schedule. Check that all cot-
ter pins are in place. Refer to specific fastener torques
listed in each chapter.
Polaris Sales Inc.
Tire Pressure Inspection (PSI - Cold)
Front
4
5
5
WARNING
Center
--
--
5
2.
MAINTENANCE
Chassis Maintenance
Rear
3
5
5
Tread
Depth 1/8I (3 mm)
4/99