One-Way Clutch Inspection (Drive Clutch) - Polaris Trail Blazer Service Manual

Hide thumbs Also See for Trail Blazer:

Table of Contents

One way clutch

One-Way Clutch Inspection (Drive Clutch)

1. Rotate one-way clutch clockwise (as viewed from

the cover plate side). The clutch should rotate on

the shaft with only slight amount of drag. There

should not be any binding or rough spots. When

rotated counterclockwise, the clutch should lock to

the shaft without slipping. If problems are noted in

either direction, continue with disassembly.

Drive Clutch Inspection

1. Remove moveable sheave spacer sleeve and the

2" PTFE washer. Visually inspect the washer for

damage. Measure the thickness and compare to

specification. Replace if worn or damaged.

PTFE Washer Thickness

Standard: .030" (.76mm)

Service Limit: .025" (.64mm)

Polaris Sales Inc.

Mark with permanent

marker before disassembly

EBS Drive Clutch

Drive Clutch Inspection