Polaris Trail Blazer Service Manual page 338

7. Remove driven clutch retaining bolt and driven clutch.
Use puller if necessary.
Driven Clutch Puller PN 2870913
8. Remove driven clutch offset spacers from the
transmission input shaft.
9. Bend back retainer tabs on three screws at the front of
the inner cover (where applicable). Remove screws
and retainer plate.
10. Remove inner cover retaining bolts at rear of cover.
11. Remove cover along with foam seal on back of cover or
shaft.
Polaris Sales Inc.
Keep Spacers In Order
6.5
CLUTCH
PVT Disassembly, Cont.
4/99