Polaris Trail Blazer Service Manual page 218

Hide thumbs Also See for Trail Blazer:

Table of Contents

Engine Disassembly, Cont.

4. Remove the two 6 mm cylinder base bolts.

5. Loosen each of the four large cylinder base bolts 1/4

turn at a time in a criss-cross pattern until loose and

remove bolts.

The bolts are inside the water jacket.

6. Tap cylinder lightly with a plastic hammer in the

reinforced areas only until loose.

7. Rock cylinder forward and backward and lift it from the

crankcase, supporting piston and connecting rod.

Support piston with piston support block PN 2870390.

8. Remove dowel pins from crankcase.

Polaris Sales Inc.

EH50PL Shown

ES33PF, EH50PL Engine

Troubleshooting