Wheel Installation; Tire Inspection; Tire Pressure - Polaris RANGER ETX 2015 Owner's Manual

Table of Contents

WHEEL INSTALLATION

1. With the transmission in gear and wheels chocked,

place the wheel in the correct position on the wheel

hub. Be sure the valve stem is toward the outside

and rotation arrows on the tire point toward forward

2. Attach the washers (if applicable) and wheel nuts

and finger tighten them.

3. Lower the vehicle to the ground.

4. Tighten wheel nuts to specification. Steel: 27 ft-lbs

Aluminum: 30 ft-lbs (41 Nm) + 1/4 Turn

If wheels are improperly installed it could affect vehicle

handling and tire wear. On vehicles with tapered wheel

nuts, make sure the tapered end of the nut goes into

the taper on wheel.

• Improper tire inflation may affect vehicle

maneuverability.

• When replacing a tire always use original equipment

size and type.

• The use of non-standard size or type tires may affect

vehicle handling.

Tire Lug Service Limit:

Replace if 1/8" (3 mm) or less.

Operating with worn tires will increase the possibility of

the vehicle skidding easily with possible loss of control.

Worn tires can cause an accident. Always replace tires

when the usable tread depth has worn out.

9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual

Maintain proper tire pressure.

Refer to the warning tire pressure decal applied to the

TIRE PRESSURE INSPECTION (PSI - COLD)

10 PSI Front

570 EFI CREW

14 PSI Front

Table of Contents