What Is Password Communication - Panasonic WORKIO DP-C262 Facsimile Manual

Password Communication

What is Password Communication?

Password Communications, including Password Transmission and Password Reception prevents your
machine from sending a fax to a wrong station or receiving a fax from an unauthorized station. You can
set Password Transmission and Password Reception independently, or both together.
To use Password Transmission, you must set a 4-digit transmission password in advance. The
password must be shared with the other compatible Panasonic machine(s). If the transmission
password in your machine does not match the Transmission password in other compatible Panasonic
machine(s), the transmission will fail.
The standard setting of "43 Password-Transmit" is set to "Off" in Function Parameters (Fax/Email
Settings> Fax Parameters). To utilize Password XMT, change the default setting to "On". For
instructions on how to change the standard setting, refer to Setting Password-Protected
Transmission (see page 72).
Ex : Password Transmission
This feature works only if the remote station is any one of the following models.
DF-1100 DP-180
DP-2330 DP-2500
DP-4510 DP-4520
DX-600 DX-800
FP-D250F FP-D350F
UF-160 UF-160M
UF-280M UF-300
UF-595 UF-650
UF-766 UF-770
UF-895 UF-990
70
Sender
Transmission
Password:
1234
DP-190 DP-1810F
DP-3000 DP-3010
DP-4530 DP-6010
UF-170 UF-180
UF-312 UF-322
UF-733 UF-745
UF-780 UF-788
UF-9000 UF-M500
Receiver
Transmission
Password:
1234
DP-1820E DP-1820F
DP-3030 DP-3510
DP-6020 DP-6030
UF-190 UF-260
UF-550 UF-560
UF-750 UF-750D
UF-790 UF-880
DP-2000 DP-2310
DP-3520 DP-3530
DP-C262 DP-C322
UF-270 UF-270M
UF-585 UF-590
UF-755 UF-755e
UF-885 UF-890