Panasonic WORKIO DP-C262 Facsimile Manual page 53

5
If a password is required, enter the
password, and then select "OK".
If you have set the polling password in "26
Polling Password" in Function Parameters
(Fax/Email Settings> Fax Parameters), the
password will appear on the display.
You can still change the password
temporarily by overwriting it with a new one.
6
Select a destination.
Refer to Entering a Destination (see page
16).
7
Press the Start key.
Polling starts when the pre-programmed time
is reached.
It you need to delete a reserved
communication file, or cancel a timer
controlled communication, refer to Deleting
a Communication Reservation File (see
page 160).
53