Document Is Not Printed Correctly - Panasonic WORKIO DP-2000 Operating Instructions Manual

Troubleshooting

Document is not printed correctly

Character is not printing in the
correct positions or the characters
near the edges of the page are
missing.
The font type is wrong.
The character is not smooth.
Fine line print cannot be obtained.
Poor photograph print quality.
Different character or symbol from
the document is printed.
Printing is exceedingly slow.
88
Problem
• Check and specify the paper size and orientation settings in the
• Check if the specified paper is loaded in the Panafax facsimile unit.
• Increase the Page Margins in the application. The Panafax
• Check if the selected font is installed in the PC.
• Check if the selected font is being replaced with a proper printer
• Select "Always use TrueType fonts" from the Font tab of the
• Select an outline font instead of a bit map font.
• Select 600 dpi resolution.
• Select 600 dpi resolution.
• Check if the Panafax Printing System printer driver is selected.
• Select the Spool settings "Start printing after first page is
• Select 300 dpi resolution.
printer driver to coincide with the application.
facsimile unit requires minimum margins of ¼ inches (4 mm) on all
sides.
font in the Font Substitution Table of the Printer Driver Properties
dialog box.
Printer Driver Properties dialog box.
spooled" from the Details tab of the Printer Driver Properties
dialog box.
Solutions