Using The Address Book - Panasonic WORKIO DP-C262 Facsimile Manual

Using the Address Book

Use a Key Name
If an Email Address is preprogrammed in the
address book, it can be selected by using a Key
Name.
To use the address book, it is necessary to have
Email Addresses added to the address book in
Function Parameters. Refer to Adding an Email
Address to Address Book (see page 167).
1
Follow the step 1 and 2 on page 102.
2
Select a Key Name tab.
3
Select the Email Address you want to
send.
Select the same destination to cancel the
choice.
To enter additional Email Addresses, repeat
Step 2 and 3.
4
Press the Start key.
The original(s) are stored into memory with a
file number. Then starts email transmission.
106
Search through "Favorites"
If an Email Address is preprogrammed in the
"Favorites", it can be selected from
"Favorites".
To use the address book, it is necessary to have
Email Addresses added to the address book in
Function Parameters. Refer to Adding an Email
Address to Address Book (see page 167).
If there are any Email Addresses added in the
"Favorites", the address book opens the
"Favorites" tab first.
1
Follow the step 1 and 2 on page 102.
2
Select "Favorites".
3
Select the Email Address you want to
send.
Select the same destination to cancel the
choice.
To set more Email Addresses, select other
addresses.
4
Press the Start key.
The original(s) are stored into memory with a
file number. Then starts email transmission.