Panasonic WORKIO DP-C262 Facsimile Manual page 166

7
Enter Key Name, and then select
"OK".
Key Names are used to select destinations
on the touch-panel display.
For using the onscreen keyboard, refer to
Before Starting in the Operating
Instructions (For Function Parameters) on
the provided CD-ROM.
8
Select whether to add the station to
"Favorites".
166
Select to show the
station in "Favorites".
Select not to show the
station in "Favorites".
9
Set the Email Address of a relay
station, and then select "OK".
This screen appears when "140 LAN RLY XMT
Request" has been set to "Valid" in Function
Parameters (Fax/Email Settings> Fax Parameters).
10
To enable sub-addressed routing, enter
a sub-address, and then select "OK".
This screen appears when "152 Sub-Addr
Routing" has been set to "Valid" in Function
Parameters (Fax/Email Settings> Fax Parameters).
11
To enable routing by the sender's
numeric ID, enter the numeric ID, and
then select "OK".
This screen appears when "153 TSI Routing"
has been set to "Valid" in Function Parameters
(Fax/Email Settings> Fax Parameters).
Press Reset key to return the machine to
the initial screen of the current active mode.