Requesting A Relayed Transmission From A Computer - Panasonic WORKIO DP-C262 Facsimile Manual

Requesting a Relayed Transmission from a Computer

Requesting a relayed transmission, fill the field in your mailer that corresponds to the destination (To) in
the following manner:
Sample entry:
sg-rly#8133111234@singapore.panasonic.co.sg
Entry example
sg-rly
#8133111234
After @
When relayed transmission completes, a communication journal is Emailed to the the initial sending station,
and a fax relay log is emailed to the administrator computer that is preprogrammed in "37 Manager's Email
Addr" of the relay station.
Enter the Relay XMT Password. (It must match the Relay XMT Password
preprogrammed in the relay station.)
Enter the telephone number of the fax station.
In addition to the telephone number, address book information may be entered between #
to @.
If a pause is required in dialing an outside line from an extension by using a PBX
(exchange) or similar equipment, enter a hyphen (-) in place of the fax number.
The host and domain names registered with the DNS server.
Explanation
149