Settings For Initial Sending Station - Panasonic WORKIO DP-C262 Facsimile Manual

Item Required function Parameters
5 User Parameters
"
37 Manager's Email Addr
For more Function Parameters details, refer to Fax/Email Settings in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.

Settings for Initial Sending Station

To use the machine as an initial sending station, program the following parameters in Function
Parameters:
Item Required function Parameters
1 Fax Parameters
"
140 LAN RLY XMT Request
Register the Department Manager's Email Address for supervising
and cost control purposes. Once registered, the machine will send an
"
Email notification to the Email Address for each Relayed XMT
Request received from a remote station. The following information is
sent.
(From: The Email Address of the originating station.)
(To : The telephone number of the destination G3 fax machine.)
Select "Valid" to use this machine as an initial sending station.
" • Invalid
Select to disable relayed transmission.
• Valid
Select to enable relayed transmission.
Explanation
Explanation
143