Panasonic WORKIO DP-C262 Facsimile Manual page 107

Use Group Dialing
For transmission to multiple destinations with
group dialing, follow the steps below.
To use a Group button, group dialing needs to be
programmed in Function Parameters. Refer to
Setting for Group Dialing (see page 175).
1
Follow the step 1 and 2 on page 102.
2
Select "Program/Group".
3
Select the Group you want to send.
Select the same destination again to cancel
the choice.
4
Press the Start key.
The original(s) are stored into memory with a
file number. Then starts email transmission.
107