Setting The Original Size - Panasonic WORKIO DP-C262 Facsimile Manual

Setting the Original Size

The Original Size is usually detected automatically when an original is placed on the platen.
If the size is not detected automatically, or you would like to change the detected size, you can set the
original size manually by following the procedure below.
Original icon is
not displayed.
This feature does not work when a original is loaded on the ADF.
1
Place original(s) on the platen.
Face Down. Align with the top
left corner. Close ADF.
Refer to Placing Originals (Facsimile/Internet
Fax) in the Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Fax key.
3
Select "Basic Menu".
30
Original size is not auto detected.
Original size is not
detected correctly.
Detected Size
4
Select "Original Size".