Error Messages Displayed On Computer - Panasonic WORKIO DP-2000 Operating Instructions Manual

Error messages displayed on computer

Problem
Error in writing to LPT1.
Unable to write to the specified
device.
Error in writing to LPT1.
Printer timeout error occurred.
Printing is disabled due to an error
in the current printer settings.
Network Print DLL Error.
Network Port is Busy.
Cannot print because an error is
found in the current printer setting.
Verify that the device is connected to the computer correctly.
Verify that the power of the device is turned on.
Verify that the paper is properly loaded.
Verify that the power of the device is turned on.
Excessive data volume or number of pages may overflow the
device's memory, disabling data reception.
Increase the timeout setting value in properties (for transmission retry).
Reference: Windows 95/98/Me [Details Tab] (See page
Windows NT 4.0 [Ports Tab] (See page
Windows 2000 [Ports Tab] (See page
Differences in settings such as paper size or printing orientation
exists between the application and the printer driver.
Specify the correct settings.
• Check if the Panafax facsimile unit is turned "On" and the 10Base-
T cable is properly connected.
• Printer Properties may be incorrectly configured. (i.e. Printer Port)
• The Panafax facsimile unit may be processing someone's print job,
please wait and try again later.
• The Panafax facsimile unit is either Transmitting or Receiving an
email.
• Verify and specify the paper size or orientation to coincide with the
application and the printer driver settings.
Troubleshooting
Action
)
41
)
67
18 )
89