Set Drift Correction (Set / Drift Setting) - JRC JMA-5912-6 Instruction Manual

3.4.19 Set Drift Correction (Set / Drift Setting)

The direction and speed of the drift are set.
This function can be used only when MAN or LOG is selected for ship-speed data.
Procedures 1
2
3
4
5
6
7
Press the [RADAR MENU] key twice.
Open the Set / Drift Setting menu by performing the following menu
operation.
4. NAV Equipment Setting
→ 3. Set/Drift Setting
Press the [1] key.
The Correction function can be turned on / off.
Off : Drift correction is not conducted.
On : Drift correction is conducted.
Press the [2] key.
The direction set numeric value input menu will appear.
Enter the value of the drift direction (true bearing).
For how to input numeric data on the numeric value input menu, see Section 3.3.4.
Press the [3] key.
The drift speed numeric value input menu will appear.
Enter the value of the drift speed.
For how to input numeric data on the numeric value input menu, see Section 3.3.4.
3-37