Available Output Signal; Standard Configuration - JRC JMA-5912-6 Instruction Manual

11.16
(1) Slave video
(2) Navigation information
(3) External alarm
(4) External monitor
11.17
(1) Scanner
(2) Display unit
(3) Equipment cable
(4) Equipment reserve parts 1
(5) Instruction manual

AVAILABLE OUTPUT SIGNAL

Radar video: TIY, VD, BP (2048 p), BZ (Terminal board TB4302)
Send capability Port: .NAV1, NAV2, GPS port at terminal board TB4303.
NMEA Connecter at rear of the process unit (D-Sub 9 PIN). IEC61162-1/2
Radar system data:
Own ship data:
Tracking target data:
AIS target data:
Alarm:
Auto pilot:
Bearing of destination:
Latitude/Longitude data:
Waypoint data:
COG/SOG data:
Cross track error:
Heading data:
Default setting: normally closed contact
Maximum current: 200 mA
(SYSALM, ARPAALM port at terminal board TB4303).
Multi scan monitor, Analog RGB, HD15 pin Connector

STANDARD CONFIGURATION

1
1 (Process unit, LCD unit, Operation unit)
10/25 kW
Standard:20 m
30 kW
Display unit to junction box
Junction box to scanner
1 (Japanese or English)
11-16
RSD
OSD
TTM, TLL, TTD, TLB, JRC-ARPA
TTM, TLL, TTD, TLB
ALR
APB
BOD
GGA, GLL, RMC
RMB, BWC
VTG
XTE
HDT, THS
Standard: 10 m
Standard: 20 m
11