JRC JMA-5912-6 Instruction Manual page 154

Setting the character size for comments
Procedures 1
2
3
Clearing mark / line data (Clear Mark / Line Data)
Procedures 1
2
3
Press the [MARK] key for 2 seconds.
The Mark Setting menu will appear.
Open the Comment Font Size menu by performing the following
menu operation.
5. Comment Font Size
Press numeric keys corresponding to the desired character size for
comments.
Normal : The characters for comments are displayed in normal size.
Small : The characters for comments are displayed in a size smaller than
usual.
The mark / line data saved in the process unit is cleared.
Open the Clear Mark / Line Data menu by performing the following
menu operation.
Plot
→ 5. Clear Memory
→ 1. Clear Mark/Line Data
Press the [1] key.
Confirmation Window will appear.
Press the [1] key.
The mark / line data is deleted.
3-59