JRC JMA-5912-6 Instruction Manual page 353

[III] Save of Antenna Time (TXRX to Display Unit)
Save the following antenna time data from the antenna unit into the display unit.
• Antenna's operating hours
• Transmission time
• Motor run time
Perform the following procedure to inherit the antenna time data when the antenna's internal control circuit
is replaced.
1. Saving the antenna time data
2. Replacing the antenna's internal control circuit
3. Restoring the antenna time data
Procedures 1. Open the Serviceman Menu.
2. Open the TXRX to Display Unit menu by performing the following
menu operation.
3. Select
The antenna time data in the antenna's internal control circuit is saved transferred to
the display unit.
[IV] Restoration of Antenna Time (Display Unit to TXRX)
Restore the antenna time data from the display unit into the antenna's internal control circuit.
Perform the following procedure to inherit the antenna time data when the antenna's internal control circuit
is replaced.
1. Saving the antenna time data
2. Replacing the antenna's internal control circuit
3. Restoring the antenna time data
Procedures 1. Open the Serviceman Menu.
2. Open the Display Unit to TXRX menu by performing the following
menu operation.
3. Select
The antenna time data in the display unit is restored transferred to the antenna's
internal control circuit.
3. Maintenance Menu
→ 5. TXRX Time
→ 3. TXRX to Display Unit
Yes in the Confirmation Window.
3. Maintenance Menu
→ 5. TXRX Time
→ 4. Display Unit to TXRX
Yes in the Confirmation Window.
7-34
7.4 Maintenance Menu
7