JRC JMA-5912-6 Instruction Manual page 200

[II] Load Information from Card to Internal Portion (Copy Card ->
Internal)
Procedures 1
2
3
4
5
6
7
8
When adding data saved on the card to the data saved in the system, data can be copied from multiple
files. However, when the maximum number of units of data is reached, additional data cannot be
loaded. Even in the ADD mode, WPT data and Route data are overwritten.
Press the [2] key while the File Manager menu is open.
Selected items for Device1 will be displayed.
Press the [1] key.
Internal is selected.
Press the [3] key.
Selected items for Device2 will be displayed.
Press numeric keys corresponding to the device in which data to be
loaded is saved.
The list of files saved in the selected device will be displayed.
Put the cursor on the data to be copied, and press the [ENT] key.
Pressing the [ENT] key will select the data. Pressing the [ENT] key one more time
will cancel the selection.
Put the cursor on
Confirmation Window will appear.
Press the [1] key to overwrite data, or press the [2] key to add new
data.
When Overwrite is selected, internally saved data is deleted and new data is loaded.
When Add is selected, new data is added to the saved data.
Press the [1] key.
The selected file is loaded into the system from the card.
Copy , and press the [ENT] key.
3-105