JRC JMA-5912-6 Instruction Manual page 64

OPTION
HEATER CONTROL PART
CIRCUIT BREAKER (5A)
(SHIPYARD SUPPLY)
0.6/1kV-DPYCYS-1.5
0.6/1kV-DPYC-1.5
AC100V 50/60Hz 1φ 200W
NBL-175 STEPDOWN TRANSFORMER
0.6/1kV-DPYC-1.5
SHIP'S MAIN
AC220/230/240V 50/60Hz 1φ
LAN CABLE H-7ZCNA0483
JRC LAN
(JRC SUPPLY, OPTION)
H-2695111153 MAX φ18
INTERSWITCH
(JRC SUPPLY, OPTION)
250V-TTYCS-4
AIS
250V-TTYCS-1
LOG(NMEA)
250V-MPYCYS-7
GYRO
250V-DPYCYS-1.5
LOG(200P)
250V-TTYCS-1
GPS
SHIP'S MAIN
AC100/110/115V 50/60Hz 1φ
AC220/230/240V 50/60Hz 1φ
NOTE: Eliminating the interference on frequencies used for marine communications and navigation due to
operation of the radar.
All cables of the radar are to be run away from the cables of radio equipment.
(Ex. Radiotelephone. Communications receiver and direction finder, etc. )
Especially inter-wiring cables between scanner unit and display unit of the radar should not be run parallel
with the cables of radio equipment.
Fig. 1.16 General System Diagram of JMA-5932-12 RADAR
NKE-1130 SCANNER UNIT
NCA-877WA ARPA PROCESS UNIT
NDB-34A PLOTTER CONTROL UNIT
(OPTION)
NQA-2103 AIS PROCESS UNIT
NCT-59A GYRO INTERFACE UNIT
NBA-5111 POWER SUPPLY
0.6/1kV-DPYC-6
NJU-84 PERFORMANCE MONITOR
14 CORES COMPOSITE CABLE
H-2695110056
MAX φ23 (JRC SUPPLY)
NQE-3151A JUNCTION BOX
0.6/1kV-DPYC-1.5
19 CORES COMPOSITE CABLE
CFQ-6912
MAX φ14.5 (JRC SUPPLY)
NCM-878 CONTROL UNIT
NDC-1477 RADAR PROCESS UNIT
CFQ-5436-5
MAX φ10 (JRC SUPPLY) 5m
DC24V
1-23
SHIP'S MAIN
AC100/110/115V 50/60Hz 1φ
AC220/230/240V 50/60Hz 1φ
NCD-4590 DISPLAY UNIT
MONITOR UNIT:
NWZ-170,HATTELAND,
MELFORD or ISIC
NCE-5171 OPERATION UNIT
(JRC SUPPLY) 5m