JRC JMA-5912-6 Instruction Manual page 112

Latitude / longitude input screen
Numeric button
- button (south latitude/
west longitude)
CLR button
Entering latitude / longitude
Procedures 1
2
3
4
5
6
On the latitude / longitude input menu, sequentially press numeric
keys to enter latitude (XX°XX．XXX').
For example, to enter 12°34.567'N, sequentially press numeric keys as follows.
[1] → [2] → [3] → [4] → [5] → [6] → [7]
To make change between north latitude and south latitude, use
and - .
North latitude: Put the cursor on + and then press the [ENT] key.
South latitude: Put the cursor on - and then press the [ENT] key.
Put the cursor on ENT
The manually entered latitude value is determined. Then, enter the longitude value.
Sequentially press numeric keys to enter longitude (XXX°XX．XXX').
To make change between east longitude and west longitude, use
and - .
East longitude: Put the cursor on + and then press the [ENT] key.
West longitude: Put the cursor on - and then press the [ENT] key.
Put the cursor on ENT
The manually entered longitude value is determined.
and then press the [ENT] key.
and then press the [ENT] key.
3-17
Entered latitude/
longitude
+ button (north latitude/
east longitude)
ENT button
+
+