JRC JMA-5912-6 Instruction Manual page 293

[III] Setting of Target Ship's Track Colors (Target Track Color)
You can set either one track color for all targets under tracking, or individual colors for the ships of track
numbers 1 to 10. The tracks of ships 11 to 20 are displayed in the same color.
* If the other ship's track function (Target Track Function) is turned off, the track data of other ships is not
saved.
Procedures 1 Open the Target Track Color menu by performing the following menu
operation.
2 Press the [1] key.
The setting items for All will be displayed.
3 Press the [numeric] key corresponding to the track display to be set.
Individual
Color name
Individual setting
4 Press the [numeric] key corresponding to the track number to be set.
The setting items for the selected track number will be displayed.
5 Press the [numeric] key corresponding to the track color to be set.
The track color of the selected track number will be set.
When Individual is selected, the track numbers Target Track No. 1
setting for Other are valid. Select a color for each target.
The color list is displayed by pressing the [numeric] key corresponding to the item number to be set.
Select a desired color. There are 8 color choices: Off , White , Gray , Blue , Green , Yellow ,
Pink , and
Red .
Target Track No. 1 to No. 10
Other
* Note that the individual setting is not enabled unless Individual is selected.
T.TRK
→ 2. Target Track Color
: Track color is set individually for ships.
: One color is set for all ships.
: Setting for 1 to 10 ships
: Setting for 11 to 20 ships
5-50
5.6 Track Function
to No. 10 and the individual
5