Ac Power Supply Troubleshooting - Xerox Phaser 6280 Service Manual

General Troubleshooting

AC Power Supply Troubleshooting

4-70
Troubleshooting Reference Table
Applicable Parts
LVPS, PL9.1.4
Troubleshooting Procedure Table
Step Actions and Questions
1. Check the voltage at the AC wall outlet.
1
2. Is there approximately 110 VAC (or 220
VAC if the printer is a 220 V
configuration) at the AC wall outlet?
1. Check the power cord for defects or a
2
loose connection.
2. Is the power cord loose or defective?
Wiring and Plug/Jack References
"Map 4 - LVPS and MCU Boards" on
page 10-12
"DC Power Supply" on page 10-21
Yes
Go to step 2.
Replace or
reconnect the
power cord.
Phaser 6280 Color Laser Printer Service Manual
No
Notify the
customer of
improper AC
output from
the outlet.
Replace the
LVPS
(page 8-80).