Phaser 6280 Color Laser Printer Service Manual
Exit Sensor
Warning
Ensure to wait for the Fuser to cool down before starting the procedure.
1.
Enter the Service Diagnostic menu (page 4-5).
2.
Open the Front Cover.
3.
Remove the Transfer Unit (page 8-8).
4.
Perform the Duplex Jam Sensor test:
Sensor.
5.
Move the Sensor up and down and check the information on the Control
Panel display. The Low and High values change from 0 up 99.
Control Panel
6.
Press the Cancel button to stop the Exit Sensor test.
Normal
Exit Sensor
L-0
General Troubleshooting
Engine Diag
>
Sensor Test
Exit Sensor
H-0
>
Exit
s6280-123
4-29