Xerox Phaser 6280 Service Manual page 309

Phaser 6280 Color Laser Printer Service Manual
Service Diagnostic Test Table (continued)
Test Control Panel Display
Clear All NVM Clear All NVM
OK?
Processing
Initialized
<Press the Cancel button
to move one level up the
menu>
<Press the Set button to
run the test>
Clear Job Clear JobHistory
History
OK?
Processing
Initialized
<Press the Cancel button
to move one level up the
menu>
<Press the Set button to
run the test>
Clear Clear AuditronPV
Auditron PV
OK?
Processing
Initialized
<Press the Cancel button
to move one level up the
menu>
<Press the Set button to
run the test>
HD Erase HD Erase
(not displayed
OK?
when Hard
Processing
Drive not
Initialized
installed)
<Press the Cancel button
to move one level up the
menu>
<Press the Set button to
execute the initialization>
Test Print Provides various test prints to be used for troubleshooting the
printer.
Menu Buttons
<Press the Up or Down
button to switch from
one item to another>
<Press the Cancel button
to move one/two level(s)
up the menu>
<Press the Set button to
run the test>
General Troubleshooting
Test Description
Clears all NVRAM of the Controller
including billing.
Deletes the job history data.
Note: Job History can also be
initialized by Clear All NVM.
Initializes Auditron or Print Volume.
Print Volume and Auditron work
exclusively and share the setting
memory area.
When Auditron is enabled, user
account and restricted information is
cleared.
When Print Volume is enabled, Print
Volume Counter is initialized.
Note: AuditronPV can also be initialized
by Clear All NVM.
Erases the Hard Disk Drive. This
feature is available only when a Hard
Disk Drive is installed.
4-21