Feed Clutch (Pl3.2.24) - Xerox Phaser 6280 Service Manual

Feed Clutch (PL3.2.24)

Phaser 6280 Color Laser Printer Service Manual
1. Remove the Rear Cover (page 8-12).
2. Remove the Right Side Cover (page 8-13).
3. Remove the PH Drive Assembly (page 8-73).
4. Disconnect the Feed Clutch wiring harness connector P/J233.
5. Release the yellow Feed Clutch wiring harness from the clamp and the
hook on the printer frame.
6. Remove the E-ring securing the Feed Clutch to the Feeder Assembly
(PL3.2.1).
7. Remove the Feed Clutch from the Feeder Assembly.
Replacement Note Replacement Note
Ensure to match the color of the Clutch Harness and the color of the
Clutch positioning rib. The Feed Clutch Harness is Yellow.
P/J233
Yellow
Service Parts Disassembly
Yellow
Yellow
s6280-199
8-41