Phaser 6280 Color Laser Printer Service Manual
Note
When performing the following step, leave the wiring harness connector
on in the clamp on the printer harness side.
8.
Release the K Mode Solenoid wiring harness on the K Drive Assembly
from the clamp and disconnect the black wiring harness connector P/
J241.
9.
Release the wiring harness connected to the Main Motor and the Sub
Motor in the Main Drive Assembly (PL8.1.2) from the hooks of the K Drive
Assembly.
P/J241
Service Parts Disassembly
s6280-231
8-77