Controller System Error - Xerox Phaser 6280 Service Manual

Controller System Error

Phaser 6280 Color Laser Printer Service Manual
The printer controller has detected error.
Note
For Chain Link 116-324: This error has occurred due to an optional 256
MB memory card is installed. Data is corrupted due to that it was stored/
accessed at incorrect locations.
Applicable Chain Link
Chain Link
Chain Link
Chain Link
Chain Link
Chain Link
Chain Link
Chain Link
Chain Link
Chain Link
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL9.1.27
Memory Card, PL9.1.30
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Print the Configuration page and
check the total memory capacity.
2. Does the total memory capacity
show 512 MB?
116-314: On Board Network MAC Address Checksum Error
116-315: ESS On Board RAM W/R Check Fail
116-317: ESS ROM Check (Main) Fail
116-323: ESS NVRAM1 W/R Check Fail
116-324: ESS Illegal Exception
116-326: ESS NVRAM2 W/R Check Fail
116-327: ESS Instruction Cache Error
116-328: ESS Data Cache Error
116-343: ASIC Error (ASIC Fail)
Wiring and Plug/Jack Map References
Error Messages and Codes
Yes No
Go to step 2. Go to step 3.
3-145