Blank Print (No Print) - Xerox Phaser 6280 Service Manual

Print-Quality Troubleshooting

Blank Print (No Print)

Initial Actions
5-26
The entire image area is blank.
Check the paper transfer path.
Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts
Laser Unit, PL5.1.2
Dispenser Assy., PL5.1.12
Print Cartridge (C/M/Y/K),
PL5.1.18-21
MCU Board, PL9.1.20
Image Processor Board, PL9.1.27
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Check the Print Cartridge (C/M/Y/K)
for damages.
2. Is the Print Cartridge damaged?
1. Check the paper condition.
2
2. Is the paper dry, recommended
type, and loaded in the correct
position?
3 1. Perform Test Print (Cyan 20%,
Magenta 20%, Yellow 20%, and
Black 20%): Service Mode
Print.
2. Does the image quality improve?
1. Check the Transfer Unit for correct
4
installation. Reseat the Transfer Unit
(page 8-8).
2. Does the image quality improve?
Example Print
Yes
Go to step 2.
Go to step 3.
Complete.
> Test
Complete.
Phaser 6280 Color Laser Printer Service Manual
Blank Print
No
Replace the
Print Cartridge
(page 8-10).
Replace the
paper.
Go to step 4.
Go to step 5.