Notations In The Disassembly Text - Xerox Phaser 6280 Service Manual

Notations in the Disassembly Text

Phaser 6280 Color Laser Printer Service Manual
6. Remove the following Maintenance Items and Consumables.
Caution
Do not touch the Transfer Unit belt area.
a. Transfer Unit (page 8-8)
Caution
Do not expose the Print Cartridges to light for more than 5 minutes. After
removal, cover the Print Cartridges to minimize the amount of light striking
the Print Cartridges. Prolonged exposure to light significantly reduces
Print Cartridges performance.
b. Print Cartridges (page 8-10)
Warning
The Fuser may be hot. Turn the printer power Off and allow at least 5
minutes for the Fuser to cool before removing the Fuser.
c. Fuser Unit (page 8-11)
Note
Names of parts that appear in the removal and replacement procedures
may not match the names that appear in the Parts List. For example, a
part called the Registration Chute Assembly in a removal procedure may
appear on the Parts List as Assembly, Registration Chute. When working
on a removal procedure, ignore any prerequisite procedure for parts
already removed.
The notation "(item X)" points to a numbered callout in the illustration
corresponding to the disassembly procedure being performed.
The notation "PLX.X.X" indicates that this component is listed in the Parts
List.
Bold arrows in an illustration show direction of movement when removing
or replacing a component.
The notation "(tap, plastic, 10 mm)" or "(metal, 6 mm)" refer to the type of
screw being removed.
Note
Provides information specific to the replacement of parts or
assemblies.
Service Parts Disassembly
8-5