Shut Down The System - Oce 2090 User Manual

Shut down the system

Introduction
Task for operators
Follow the shut-down procedure that is described in this part before you use
the power switch
system shut down in a controlled way.
To save energy, you can also put the Océ VarioPrint 2090 into sleep
Note:
mode (see 'Sleep mode' on page 28).
How to shut down the Océ VarioPrint 2090
Press the System information key
1
manager'.
Press the key for 'System' to select 'Shut down'.
2
The operator panel displays the message 'Are you sure you want to shut
down?'.
Press the key for 'Yes'.
3
The printer starts to shut down.
The LED at the right-hand side of the operator panel changes from green to
red.
Wait for the message 'When the light next to the System information key on the
operator panel is off, you can turn off the system. Press Close to continue.'.
Press the key for 'Close' to continue the shut-down procedure. The following
4
occurs.
The LED in the On/Off button
The screen of the operator panel goes off.
The LED next to the System information key
Press the power switch
5
38 Océ VarioPrint 2090 User manual
on the Océ VarioPrint 2090 . This procedure makes the
on the operator panel to open the 'System
changes from green to amber.
.
goes off.