Give Priority To Jobs - Oce 2090 User Manual

Give priority to jobs

Introduction
Task for operators
The job queue contains jobs that wait to be printed. The job on top of the job
queue is the current job that is printed.
You can interrupt the current job to give priority to an urgent job. Depending
on the urgency of the job, you can select 'Move to top' or 'Interrupt'. You can
move more than 1 job. You must move the jobs one job at a time.
Use 'Interrupt' + 'Move to top' for jobs with the highest priority.
A flag
Note:
[20] Job priority
When you select Then
'Move to top'
'Interrupt' +
'Move to top'
[20] Job priority
Before you begin
Make sure that the urgent copy job or print job is sent to the job queue.
You can use the Next job function (see 'Next job' on page 14) to prepare your
urgent job while the printer proceeds with the current print job.
The job queue
indicates an urgent job.
The current print job is finished first. Then the urgent job
is printed.
The current print job stops after the set that is currently
printed. Then the urgent job is printed.
When the urgent job is ready, the interrupted print job is
resumed.
55