Turn On The System - Oce 2090 User Manual

Turn on the system

Introduction
Task for operators
The system has the following switches and buttons (see the illustration for the
correct location).
Power switch
You can find the power switch at the left-hand side of the printer. The power
switch cuts and connects the power to the complete system.
On/Off button with amber and green LED
The On/Off button allows you to toggle the status of the system between the
stand-by mode and the sleep mode. This action is only possible if the power
switch
phase, the operator panel displays 'Copy' and 'Print from mailbox...' or
'Scan', 'Copy' and 'Print'. What the operator panel displays, depends on the
configuration of your system.
[5] Turn on the system
[5] Turn on the system
In the table below you find the state indicators of the LED in the On/Off button
and the state indicators of the LEDs at the right-hand side of the operator panel.
When the system is in the sleep mode, you must wake up the system to
Note:
process the jobs (see 'The power modes' on page 26).
36 Océ VarioPrint 2090 User manual
is in '1' position and the startup phase was done. After the startup
.