Combine Subsets Into One File - Oce 2090 User Manual

Combine subsets into one file

Introduction
Task for operators
The Océ VarioPrint 2090 allows you to create your documents and make a
report, a manual or a brochure. Combined (built) documents can include
different parts like a title page, the table of contents, the various chapters and
the appendices. You can combine different originals into one digital file.
Subsets
A subset of a document is a number of pages to process in a defined way. When
the processing method changes, a new subset begins. When you process parts
of a document in different ways, you must divide the document into subsets.
The Set-build key
Use the Set-build key
Remember that you can only combine hardcopy originals into a set-build job.
You can not use the Set-build key
You can only use originals from the glass plate or the automatic document
feeder. Use the 'Scan' function on the operator panel to start a set-build job.
The automatic document feeder
Use the automatic document feeder to copy a set of originals. You can put a
maximum of 75 originals into the automatic document feeder. This number
refers to A4 originals of 80 g/m
The originals must have the same size.
Use originals that are larger than 140 x 203 mm.
Use originals that are smaller than 297 x 432 mm.
The weight of the originals can be between 60 and 170 g/m
Make sure that the size is one of the supported standard formats if you
Note:
use the automatic document feeder.
Before you begin
Divide your documents into subsets.
1
Arrange the different subsets in the required order.
2
144 Océ VarioPrint 2090 User manual
to scan different subsets.
for digital documents in the mailbox.
2
(20 lb bond). Remember the following.
2
.