Edit A Mailbox Job - Oce 2090 User Manual

Edit a mailbox job

Introduction
Task for operators
When you start a job from the mailbox, a copy of this mailbox job is sent to the
job queue. You can change the settings of that job in the job editor before you
send the job to the job queue. Your changes are not applied to the original job
that you sent to the mailbox. The changes you make in the job editor are
applied to the job that is sent to the job queue.
Options
You access the job settings through the 'Edit...' function. The job settings are
accessible in the following 4 sections.
'Basic'
'Paper'
'Layout'
'Extra'
Use the numeric keys to define the number of prints. The number of prints is
displayed at the left-hand side of the screen.
If you select more than one job in the mailbox and you edit a setting, that
Note:
setting is changed in all the selected jobs.
When to do
If you want to check or change the job settings of a print job or define the
number of prints before you start a print job, you can access the job settings in
the mailbox.
After you have checked and changed the settings in the 4 sections, you can
press the Start key
The print function
to send the modified job to the job queue.
83