Use the scan-to-file function
Types of scan job settings
Introduction
Information for operators
When you select a scan profile on the operator panel of the Océ VarioPrint
2090 , you can change some settings. A scan profile contains two types of
settings.
Fixed settings. These settings are the destination, the resolution and the file
format of the scan job.
Settings that you can change, like the settings for 'Original', 'File' and
'Image'.
After you select a scan profile, you can press the function key 'Edit...' to change
the settings for the current job. Your changes are not saved to the scan profile.
Only the system administrator can change the default settings of a scan profile
permanently (see 'About the scan profiles file' on page 135).
You can check the main properties of the scan job in the 'Info' section.
Note:
The settings in the 'Original' section
[49] The 'Original' section
[49] The 'Original' section
136
Océ VarioPrint 2090 User manual